AGV K6 Manuel D'utilisation page 8

1 THANK YOU FOR CHOOSING AGV
This helmet is the result of research and expierence that AGV has acquired since 1947.
We have always been committed to designing and creating helmets that first of all can
guarantee the maximum safety to the user, always starting from the hardest test-bed:
the competitions. Witnesses are those many champions that have chosen to rely on AGV
helmets: Giacomo Agostini, Franco Uncini, Wayne Rainey, Troy Corser, Loris Capirossi,
Max Biaggi and, for more than 20 years, Valentino Rossi.
Everyday in AGV we do our best to ensure our products tell the enthusiasm of our
incessant research, because we are pasionate bikers and we understand how the daily
use of the helmet is different from the competition. It is because of this that we have also
been able to combine safety at the highest level with exemplary comfort, reliability and
durability, so you can always feel safe and comfortable in every kind of riding situation.
2 PRODUCT SUPPORT DOCUMENTATION
The documents and their possible integrations are part of the product and have to be
kept for future consultations. Dainese S.p.A. reserves the right to modify them without
notification. To ensure you own the latest available update, do please get in contact with
an AGV Service Center.
Before using the helmet, it is necessary to carefully read what is contained in the
Safety Warning document, that you can find inside of the helmet packaging together
with the present User manual. In case this document isn't there, please turn to an AGV
Service Center before using the helmet.
2.1 LETTERING AND SYMBOLS
Specific prescription and/or precaution-
ary measure to adopt scrupulously.
Warning! The non-observance can incur a damage
to the product and a possible consequent
decline of the warranty and/or a decrease
of the safety performances.
Specific information for a better exe-
Notice!
cution process of activation, handling,
control, regulation, and maintenance
interventions.
Preliminary and/or preparatory require-
Condition ment for an operation of removal, instal-
lation, handling or cleaning.
•
Single action in a sequence of actions.
→ Conclusion and/or result of an operation.
12
EN
right left
side side
3 INTRODUCTION TO K6 HELMET
3.1 USE AND SAFETY DESTINATION
K6 has been engineered for a motorcycle use. It must not be used for other purposes
than motorcycle riding.
Warning! Before riding, carefully read the contents of the Safety Warning
document.
3.2 COMPONENTS
1. Rear extractor
2. Base trim
3. Visor mechanism
4. Visor
5. Front vents
6. Anti-fog Pinlock lens
®
(accessory included in
the packaging)
7. Breath deflector
8. Chin vents
1 2
9. Cheek pad and neck roll
10. Retention system
11. Chin strap upholstery
12. Crown/Top pad
13. Rescue Pull System
14. Wind protector
(accessory included
in the packaging)
3 4 5 6 7
9 10 11 12 13 14
13
EN
8