Replacing A Paper Roll - Sony UPA-PC500 Mode D'emploi

3
Unroll a short length of paper.
4
Close the receipt printer cover so that the end of the
unrolled paper emerges from the printer.

Replacing a Paper Roll

Before replacing a paper roll, make sure the unit is
turned off. See "Shutting Down" on page 7.
1
Open the receipt printer cover by inserting the eject
pin into the eject hole on the left.
Note
Make sure to insert the pin straight into the hole.
The cover will not open if the pin is inserted at an
angle.
2
Remove the used paper roll.
3
Complete steps 2 to 4 of "Inserting a Paper Roll" on
page 8.
9
Replacing a Paper Roll