Factory Setting - Sensopart FT 50 RLA-70-L8 Instructions De Service Et De Montage

Mounting and
operating instructions
No. LED pattern
Description
Response times
0.4 ms = measured value (no average) (function 13)
4 ms = averaging with 10 measured values (function 14)
40 ms = averaging with 100 measured values (function 15)
14 Switches on 4 ms averaging:
Q Q
1 2
I OK
Switch with
C FA
SET
The last (max.) 10 measured values are used to form the average. For an explanation on
„Averaging" see function no. 13
15 Switches on 40 ms averaging:
Q Q
1 2
I OK
Switch with
C FA
SET
The last (max.) 100 measured values are used to form the average. For an explanation on
„Averaging" see function no. 13
16 Scaling the analogue output (set 4 mA point):
Q Q
1 2
I OK
Save mea-
C FA
sured value
with
Once the
point of the analogue output. The incline of the output characteristics results from this point and
the 20 mA point (function no. 17). Should no object be present in the detection range, the end
of the measuring range is used.
17 Scaling the analogue output (set 20 mA point):
Q
Q
1 2
OK
I
Save mea-
C FA
sured value
with
Once the
mA point of the analogue output. The incline of the output characteristics results from this point
and the 4 mA point (function no. 16). Should no object be present in the detection range, the
end of the measuring range is used
FT 50 RLA Disctance sensor - GB - 068-13671 - 20.04.2009-05
Status indicator „ZA"
ON, if active
OFF, if inactive
ON, if active
OFF, if inactive
ON, when object is within the measuring range
OFF, when object is outside the measuring
range
SET
SET
key has been activated, the current measured value corresponds with the 4 mA
ON, when object is within the measuring range
OFF, when object is outside the measuring
range
SET
SET
key has been activated, the current measured value corresponds with the 20
Illustr. 12 Output characteristics in relation to arithmetical mean
15500273

Factory setting

Measuring object
Direction of movement
Response time
Averaging 4 ms OFF
(„ZA" = OFF)
Averaging 40 ms OFF
(„ZA" = OFF)
4 mA = end of measuring
range
20 mA = end of measuring
range
53