Hach TitraLab KF1000 Série Manuel D'utilisation De Base page 18

Option
New sample
Cell management Use this option to fill or empty the measurement cell with the pumps. Refer to
20. Push Exit to go back to the main menu.
Cell management
Use this option to fill or empty the measurement cell with the pumps.
1. From the main menu, select
2. Push the left and right arrow keys to make a selection.
Option
Fill cell (pump 1) Use this option to fill the measurement cell with reagent from pump 1. Push the up arrow
Empty cell
(pump 2)
3. Push Exit to go back to the main menu.
Manage the data log
To select data to view, delete or export, specify data filters
1. From the main menu, select
2. Select an option, then push Select.
Option Description
View data log Views measurement data. Select individual lines of data to view more content.
Delete data log Removes measurement data from the system. Previews data selection before it is
removed.
Export data log Exports measurement data from the system to an external device. Preview data selection
before it is exported. Make sure that an external device is connected to the instrument
(e.g., a USB key, external hard drive, etc.).
3. Specify the data extraction parameters. Push the left and right arrow keys to make a selection.
Push the up and down arrow keys to select an option.
Option
Result type
Application
Date
Operator
4. Push Preview to preview the results.
18 English
Description
Use this option to start the same titration on a new sample. No standard deviation or
relative standard deviation measurements will be done.
management on page 18.
Cell management.
Description
to stop the procedure.
Chemical exposure hazard. Before selecting this option, examine the level of liquid in
the waste bottle. Make sure that there is enough space in the bottle for all of the liquid
from the measurement cell.
Use this option to empty the measurement cell with pump 2. Push the up arrow to stop
the procedure.
Data log.
Description
Sets the type of result available.
Sets the available applications.
Sets the date range.
Sets the available operators.
C A U T I O N
Cell