STERWINS 20VPHT2-44.1 Notice De Montage, Utilisation Et Entretien page 299

4.1 UNBOXING
1
5
6
9
• Wear gloves when unboxing.
• Do not use cutter, knife, saw or any other similar tool for unboxing.
• Carry the tool only by the handle (10 & 15).
• Keep the box for further reuse (transport and storage).
• Keep instruction manual in a dry area for further consultation.
4.2 INSTALLATION
Attaching the trimmer head : illustration 2.1 and 2.2
Align the telescopic pole with the trimmer head.
Insert the telescopic pole into the trimmer head locking base.
NOTE: The grooves must be aligned with the arrow positions near the locking base.
Slide the locking sleeve onto the locking base and rotate the locking sleeve anticlockwise to secure.
Make sure the rear handle is properly aligned with the blade.
WARNING :Make sure the telescopic pole is inserted fully and
the locking sleeve is properly tightened before operating.
Failure to lock the telescopic pole as instructed could result in serious injury.
2
3
4
7
8
10
11
12
15
1. Hedge Trimmer Blade
2. Blade Cover
3. Air Vents
4. Pivot Button
5. Trimmer Head
6. Support
7. Locking Sleeve
8. Telescopic Pole
9. Locking Clip
10. Front Handle
11. Shoulder Strap
12. Bracket
13. Trigger Switch
14. Safety Lock Button
15. Rear Handle
13
14
299
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN