Intended Use; Safety Information - Scheppach HMS850 Traduction Des Instructions D'origine

• Blade adjustment block (1x)
• Hand crank (1x)
• Locking screw (1x)
• Washer Locking screw (1x)
• Chip extractor adapter (1x)
• Chip extractor (1x)
• Parallel stop (1x)
• Planing knife cover (1x)
• Knife covering plate (1x)
• Allen screw (2x)
• Spring ring (2x)
• Washer large (1x)
• Hexagon nut, self-locking (1x)

5. Intended use

The surfacing and thicknessing plane is designed for the surfac-
ing and thicknessing of all types of whole pieces of square,
rectangular or chamfered converted timber.
The machine is to be used only for its prescribed
purpose.
m WARNING!
The following work must not be carried out:
• Insert work (in other words any work which does not extend
over the full length of the workpiece)
• Recesses, tenons or cut-outs
• Planing highly warped timber in which there is inadequate
contact with the feed bench.
m The protective equipment on the appliance is strictly prohib-
ited to be disassembled, changed, used in conflict with the des-
ignation and it is prohibited to attach any protective equipment
of other manufacturers.
The bridge guard must not be removed during machining. The
unused part of the blade shaft must be covered.
Requirements for operating staff
The appliance may only be operated and maintained by per-
sons familiarised with it and informed about possible risks.
Never let children work with the appliance.
Never let adults work with the appliance unless they have been
properly trained.
The operating staff must carefully read the Operating Instruc-
tions before using the appliance.
Qualification:
Apart from the detailed instructions by a professional, no spe-
cial qualification is necessary for appliance using.
Minimum age:
Persons over 18 years of age can only work on the appliance.
An exception includes youngsters trained in order to reach
knowledge under supervision of the trainer during occupa-
tional education.
Local regulations may stipulate the minimum age of the user.
18 GB
Training:
Using the appliance only requires corresponding training by a
professional or the Operating Instructions. No special training
is necessary.
The equipment is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse.
The user / operator and not the manufacturer will be liable for
any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use
in commercial, trade or industrial applications. Our warranty
will be voided if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.

6. Safety information

General Safety Instructions
Warning!
When using electric tools basic safety precautions should always
be followed to reduce the risk of fire, electric shock and personal
injury including the following.
Read all these instructions before attempting to operate this prod-
uct and save these instructions.
Safe operation
1. Keep work area clear
- Cluttered areas and benches invite injuries.
2. Consider work area environment
- Do not expose tools to rain.
- Do not use tools in damp or wet locations.
- Keep work area weil lit.
- Do not use tools in the presence of flammable liquids
or gases.
3. Guard against electric shock
- Avoid body contact with earthed or grounded surfaces
(e.g. pipes, radiators, ranges, refrigerators).
4. Keep other persons away
- Do not let persons, especially children, not involved in
the work touch the tool or the extension cord and keep
them away from the work area.
5. Store idle tools
- When not in use, tools should be stored in a dry
locked-up place, out of reach of children.
6. Do not force the tool
- lt will do the job better and safer at the rate for which
it was intended.
7. Use the right tool
- Do not force small tools to do the job of a heavy duty
tool.
- Do not use tools for purposes not intended;
or example do not use circular saws to cut tree limbs
or logs.
8. Dress properly
- Do not wear loose clothing or jewellery, they can be
caught in moving parts.
- Non-skid footwear is recommended when working
outdoors.
- Wear protective hair covering to contain long hair.