Storage; Receipt And Unpacking; Unit Elements - Unico Digitemp Manuel D'installation, Emploi Et Entretien

1
1.4.1

Storage

Store the packages in a closed room, protected from atmospheric agents and resting on pallets or beams to isolate from the ground.
DO NOT OVERTURN THE PACKAGE.
1.4.2

Receipt and unpacking

The products are packaged by expert personnel using suitable packaging material.
The units are delivered complete and in perfect condition, however we suggest that you perform the following controls of the quality
of the shipping service:
- on receiving the goods, check if the package is damaged. If affirmative, accept the goods with reserve, taking photographs
of any apparent damage.
- unpack and check the contents against the packing list.
- check that none of the components have been damaged during transport; if they have, inform the forwarder by registered
letter with receipt within 3 days of receipt of the goods and enclosing photographic evidence.
Send the same information by fax to XPELAIR.
No complaints will be accepted if made more than 3 days after the delivery of the goods.
Important note:
Keep the packaging at least during the warranty period for any possible delivery of the product to a service centre.
Dispose of the packaging in compliance with the regulations concerning refuse disposal.
1.5 UNIT ELEMENTS (fig. 2)
The two units that make up the air-conditioner are packed separately in cartons.
Packaging may be transported per single units, by hand by two authorized persons, or loaded on a trolley, even piling up to a
maximum of three packs.
1) Air outlet flap
2) Suction flap
3) Function and alarms display console
4)
Air intake grid
5)
Air filters
6)
Purifying filter
7)
Active carbon filter
8) Lower guard
9) Condensate discharge
10) Emergency condensate discharge
11) Power cable
12