Holding The Appliance - SilverCrest SSMS 600 C3 Mode D'emploi

NOTICE
NEVER fi ll the bowl 8 BEYOND the MAX marking. Otherwise, the
►
appliance does not function optimally.
Place the bowl lid 6 onto the bowl 8 and turn it until tight. Thereby, the
■
lugs on the edge of the bowl 8 must be guided into the rail on the bowl
lid 6. Please ensure that the blade 7 is correctly engaged in the bowl lid
6.
Place the motor unit 4 on the bowl lid 6 so that the arrow points to the
■
symbol
NOTICE
Should you wish to keep foodstuff s in the bowl 8 you can remove the
►
base of the bowl 8 and use it as a lid. For this, carefully remove the bowl
lid 6 and motor unit 4 and, if needs be, the blade 7. Loosen the base
of the bowl 8 and then place it onto the bowl 8.

Holding the appliance

To operate the appliance, hold it as follows:
SSMS 600 C3
. Turn the motor unit 4 until the arrow points to the symbol
GB
IE
.
9