Operation - SilverCrest SSMS 600 C3 Mode D'emploi

Operation

GB
IE
10
WARNING! RISK OF INJURY!
► Foodstuff s should not be too hot. Squirting contents may cause scalding.
NOTICE
When you beat cream with the whisk 0 hold the container at a slant
►
during the beating. In this way the cream will be thicker quicker. Ensure
that cream cannot be sprayed out of the container while it is being beaten.
When whipping cream, slide the speed regulator 1 to position "5".
When you have assembled the blender set as you wish to use it:
1) Insert the plug into a mains power socket.
2) Press and hold the switch 2 to process foodstuff s at the standard speed.
Slide the speed regulator 1 in the direction of "5" to increase the speed.
Slide the speed regulator 1 in the direction of "1" to reduce the speed.
3) Press and hold the turbo-switch 3 to process foodstuff s at a higher speed.
By pressing the turbo-switch 3 the maximum processing speed is available
immediately.
4) When you have completed the processing of the foodstuff s, simply release
the switch.
NOTICE
► Should unusual noises be heard during operation, such as squeaks or
similar, lubricate the drive shaft of the blender with a few drops of neutral
cooking oil:
SSMS 600 C3