Before First Use; Preparing Ingredients; Operating The Appliance - SilverCrest SSM 180 A1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ATTENTION! PROPERTY DAMAGE!
Never fill the appliance with hard ingredients such as nuts, stalks,
large grains or seeds!
Never fill the appliance with hot ingredients!
Never use the appliance to crush ice cubes unless there is liquid in
the blender jug!
Before first use
1) Remove all of the parts from the box and
remove the packaging material and any
protective film.
2) Clean all components as described in Chapter
"Cleaning and care". Ensure that all parts are
completely dry.

Preparing ingredients

Remove all peel, such as orange peel or kiwi
skin, from the fruit.
Remove large pips and stones, such as found in
peaches, from the fruits.
Cut the fruit into small pieces (approx. 1 - 2 cm).
Chop herbs or salads into small pieces.
HINWEIS
You can also crush ice cubes with this appli-
ance (max 50 g/approx. 2–4 ice cubes).
However, only add the whole ice cubes to the
blender jug
if other liquids are also to be
processed in it. Press the start button
a pulsating manner when you process whole
ice cubes. Generally, however, we recommend
that you use already crushed ice in this device.

Operating the appliance

1) Place the base
SSM 180 A1
on a clean and level surface.
2) Fill the prepared ingredients in the blender jug
Always add liquid ingredients first and then the
more solid ingredients such as the fruit and/or
crushed ice.
ATTENTION! DAMAGE TO PROPERTY!
Never fill the blender jug
to more than the MAX marking! The appliance
will not be able to process the ingredients!
3) Place the blade holder
jug
so that the blade
blender jug
firmly in place.
4) Now place the blade holder
attached blender jug
that the arrow on the base
the
symbol on the blade holder
ATTENTION! DAMAGE TO PROPERTY!
To turn the blade holder
blade holder
blender jug
will detach and the ingredients will spill out!
in
5) Turn the blade holder
the base
blade holder
audibly click into place so that it sits firmly on
the base
6) Insert the plug into a mains power socket.
7) Press and hold the start button
smoothie has reached the desired consistency!
with ingredients up
on the blender
extends into the
, and screw the blade holder
along with the
onto the base
is pointing to
, only hold the
and never try to turn the
! Otherwise the blender jug
so that the arrow on
points to the
symbol on the
. The blade holder
.
GB │ IE
.
such
.
must
until the
 5

Publicité

Table des Matières
loading

Table des Matières