Assembling; To Assemble The Hand Blender; Assembling The Wire Whisk; Assembling The Liquidiser - SilverCrest SSMS 600 C3 Mode D'emploi

Masquer les pouces Voir aussi pour SSMS 600 C3:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 76

Assembling

GB
IE

To assemble the hand blender

Assembling the wire whisk

Assembling the liquidiser

8
WARNING! RISK OF INJURY!
Only insert the plug into the power socket after you have assembled the
appliance for use.
NOTICE
Before the fi rst use, clean all parts as described in the chapter "Cleaning".
WARNING! RISK OF INJURY!
The blade is extremely sharp! Handle it with great care.
Place the hand blender 5 on the motor unit 4 so that the arrow points to
. Turn the hand blender 5 until the arrow on the motor unit 4
the symbol
points to the symbol
Insert the whisk 0 into the whisk holder 9.
Place the so assembled whisk 0 onto the motor block 4 so that the arrow
points to the symbol
symbol
.
WARNING! RISK OF INJURY!
The blade 7 is extremely sharp! Handle it with great care.
Carefully place the blade 7 onto its retainer in the bowl 8.
Turn the blade 7 a little until it slides onto the holder.
NOTICE
The blade 7 is not fi xed fi rmly in the holder. This is normal. The blade 7
is only sits fi rmly when the bowl lid 6 is put on.
Fill the bowl with the foodstuff s you wish to liquidise 8.
.
Turn the motor block 4 until the arrow points at the
SSMS 600 C3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ssms600c3-072013-2

Table des Matières