Télécharger Imprimer la page

Conditions Environnementales; Contenu De L'emballage - Conrad Electronic DJ - 1000 Mode D'emploi

Publicité

Conditions environnementales

Température d'utilisation :
Humidité relative de l'air :

Contenu de l'emballage

Module de commande
Module lecteur de CD
2x cordons Cinch
2x cordons Remote (cordon jack mono 3,5mm)
2x cordons SYSCOM
Mode d'emploi
Cordon d'alimentation en courant
48
+10 à +50 °C
< 90 % (non condensante)
The unauthorised conversion and/or modification of the product is inadmissible
because of safety and approval reasons (CE).
Make sure that the system is sufficiently vented. Observe these operating instructions.
Do not expose the system to high temperatures, strong vibrations, high humidity or
heavy mechanical strain.
The product has been designed in accordance with safety class II.
Only a socket outlet with 230V/50 H (10/16 A) may be used for power supply. Never try
to connect the system to a different voltage.
The whole system has only been approved for an indoors operation.
Do not operate laser devices without supervision.
Make sure that all the electrical connections and leads between the system and any extension leads have
been executed properly and in accordance with the operating instructions.
Keep electric devices out of reach of children. Be especially careful when children are
present. Children could try to put objects into the system. There is a risk of a danger-
ous electric shock.
Do not place any containers like flower pots on the system. Never spill any liquids over
the system. There is a great risk of fire or dangerous electric shock. Should liquid have
entered the system, nevertheless, disconnect the system immediately (pull the plug)
and contact an expert.
The mains lead must never be plugged or unplugged with wet hands.
Never pull the cable, but use the special touch-surface of the plug for pulling it from
the socket.
Do not leave the packaging materials littered; plastic films/bags, polystyrene parts etc. can become dan-
gerous toys for children.
When installing the product, make sure that the cables are neither kinked nor squashed.
Always pull the plug from the outlet
- before cleaning the product,
- during thunderstorms
- if you do not intend to use the system for a certain time.
Make sure that the system is sufficiently vented. Never cover the ventilation openings.
21

Publicité

Chapitres

loading