Exhaust Pipe - Spheros Thermo 230 Notice De Montage

Thermo 230/300/350

Exhaust pipe

9 Exhaust pipe
The opening of the exhaust pipe must not point towards the front of the
vehicle.
The exhaust pipe opening must be located so that it cannot become clo-
gged with snow and mud.
Rigid pipes of unalloyed or alloyed steel with a minimum wall thickness
of 1.0 mm or flexible piping of alloyed steel only must be used as
exhaust line. The exhaust pipe is secured to the heater using a clamping
collar, for example. See the statutory regulations for other requirements.
Maximum dimensions of the exhaust pipe:
– Internal diameter: 70 mm
– Maximum line length:
5 m without the combustion air intake extension
– Total length of air intake line and exhaust pipe max. 5m
– Maximum bend: 270°
NOTE:
If the exhaust line is installed near heat-sensitive parts, it must be insu-
lated.
53