Technical Data Delhi 114 - HASE Delhi 114 Mode D'emploi

10. Technical Data Delhi 114
The Delhi 114, certified in compliance with DIN-EN 13240 and Art. 15 a B-VG (Austria),
can only be operated when the fire box is closed; more than one device can be connected
to the chimney.
VKF-No.: 23311; Inspection Report No. (A): FSPS-Wa 2210-A
The following data applies to the chimney characteristics in accordance with EN 13384-1 / 2:
Combustion Values
Nominal Thermal Output
Waste Gas Mass Flow Rate
Waste Gas Outlet Temp.
Min. Supply Pressure at Nominal Thermal Output
CO content at 13% O2
Efficiency
Particulate
Depending on the insulation of the building, the nominal thermal output of 5 kW indicated
on 15 - 60 m² (subject to change)
Dimensions: Height
Stove
113,5 cm
Fire box 44 cm
Weight:
Flue pipe diameter:
Pipe diameter of Hase ventilation system*
* For separate air supply in low-energy houses and insufficient combustion air supply in the room where
the stove is installed
Wood
5 kW
4,5 g/s
315 ˚C
12 Pa
1021 mg/m³
80,4 %
16 mg/m³
Width Depth
45 cm 45 cm
29 cm 28 cm
118 kg
15 cm
10 cm
Front view
Ø 39
Ø 45
Top view
Side view
7 Ø 25
Connection area for the inst.
of Hase air system below
Dimensions in cm
39