Technical Data - HASE Bari C.11 Mode D'emploi

12. Technical Data

The Bari C.11, certifi ed in compliance with DIN-EN 13240 : 2005-10/1 : 2008-06 and
Art. 15 a B-VG (Austria), can only be operated when the fi re box is closed; more than
one device can be connected to the chimney.
VKF-No.: 22674; Inspection Report No. (A): FSPS-Wa 2094-A
The following data applies to the chimney characteristics in accordance with EN 13384-1 / 2:
Combustion Values
Nominal Thermal Output
Waste Gas Mass Flow Rate
Waste Gas Outlet Temp.
Min. Supply Pressure at Nominal Thermal Output
CO content at 13% O2
Effi ciency
Particulate
Depending on the insulation of the building, the nominal thermal output of 6 kW indicated
on 20 - 80 m² (subject to change)
Dimensions: Height
Stove 108 / 111,5 / 112 cm
Fire box 43 cm
Steel
Weight 146 kg
140 kg with ceramic
154 kg with soapstone
Flue pipe diameter:
Pipe diameter of Hase ventilation system*
* For separate air supply in low-energy houses and insuffi cient combustion air supply in the
room where the stove is installed
36
Wood Briquette
6 6 kW
5,5 5,5 g/s
320 320 ˚C
12 12 Pa
1104 882 mg/m³
80 79 %
13 26 mg/m³
Width Depth
48 cm 48 cm
28 cm 30 cm
Ceramic Soapstone
165 kg 205 kg
15 cm
10
Front view
Ø 48
Top view
cm
Side view
35
6,5
Connection area for the inst.
of Hase air system below
Stove's angle of rotation:
180° · Can be stopped in place and locked right/left
in 15° gradients. Observe safety distances to
combustible or fl ammable materials!
Dimensions in cm