Safety Distances; Fuel Load Sizes And Thermal Output - HASE Delhi 114 Mode D'emploi

3. Safety Distances
The following safety distances must be complied with for flam-
mable materials and materials sensitive to heat (e.g. furniture,
wood or synthetic cladding, curtains etc.):
Delhi 114:
Within the radiation range of the firebox pane (fig. 1): 100 cm
in front of and 50 cm to the side of the stove.
Delhi 124:
Within the radiation range of the firebox pane (fig. 1): 110 cm
in front of and 55 cm to the side of the stove.
With regard to flammable materials beyond the heat radiating
area, a safety distance of 15 cm at the sides of the stove and 15
cm behind the stove has to be adhered to (fig. 1).
WARNING!
Flammable flooring materials (e.g., wood, lami-
nate, carpeting,) must be protected with a floor-
plate made of non-combustible material e.g.,
tiles, safety glass, slate, or sheet steel).
The size of the floorplate must be larger than
the base of the stove by at least 50 cm in front
and at least 28 cm at the sides of the stove.
Depiction of safe distances without rotary
function. Should a base plate be necessary, the
range of rotation of the chimney stove must be
adapted. (fig. 2)
50/55
fig. 1
28 28
floorplate
50
fig. 2
4. Fuel Load Sizes and Thermal Output
The thermal output depends on the amount of fuel you put in
the stove. When adding more fuel, please do not exceed the
maximum fuel load size of 1.5 kg (Delhi 114) / 2.0 kg (Delhi
124). Exceeding the maximum fuel load size leads to a danger
of overheating, which can result in damage to the stove and
the risk of a stove fire.
NOTE!
To attain a thermal output of approx. 5 kW (Del-
hi 114) / 7 kW (Delhi 124), burn wood logs that
weigh 1.3 kg (Delhi 114) / 1.6 kg (Delhi 124) and
are no longer than 25 cm in length for about
Dimensions in cm
45 min.
The Delhi is intended for intermittent operation, please only
apply one fuel layer at a time.
Dimensions in cm
35