Installation Conditions And Relevant Building Regulations; Safety And Safety Distances - HASE Lisboa Mode D'emploi

1. Installation Conditions and Relevant Building Regulations
The stove must be installed in accordance with the instructions and requirements stipulated
by the respective national and European standards and local regulations.
In Germany, the stove must be registered with the local master chimney sweep for inspec-
tion prior to initial operation.
2. Safety and Safety Distances
At the front and sides of the stove, no flammable, combustible or heat-sensitive materials
(e.g. furniture, wood or plastic panelling, curtains, etc.) are to be located within a distance of
80 cm in the heat radiating area of the fire box window. In regards to flammable materials
beyond the heat radiating area, a safety distance of 20 cm at the sides of and behind the
stove has to be adhered to (see Fig. 3).
Children should never be left unattended near the burning stove.
In accordance with the German Combustion Ordinance Draft, flammable flooring materials
(wood, laminate, carpeting,) must be protected with a floor plate made of non-combustible
material (tiles, safety glass, slate or sheet steel).If a floor plate is required, its size must match
the rotating range of the stove.
Never turn stove when lighting fire!
60
Modifying or making changes to the stove is not permitted. Only original re-
placement parts from Hase Kaminofenbau GmbH may be used.
When using a floor plate, the safety distances stipulated by DIN 18891 apply.
Floor plate
Fig. 2
Distances to Heat-sensitive and Combustible Materials
80 cm
Fig. 3 Layout for Wall Location
80 cm
Layout for Corner Location