The Rotatable Console - HASE Lisboa Mode D'emploi

8.3. The Rotatable Console
The Lisboa is equipped with a rotatable console that allows you to adjust the angle of
rotation to the spatial conditions and safety distances by setting the limit screws. The ex
works setting angle is 45° to the left and 45° to the right, starting from the centre position.
Always comply with the safety distances to combustible and flam-
mable materials!
If a floor plate is required, its size must match the rotating range of
the stove. Never turn stove when lighting fire!
Adjusting and Changing the Angle of Rotation
- Remove shield [a] by loosening the two
hexagon socket screws .
- Move locking bolt [b] upwards and turn
stove to the right or left as far as it will
go.
- Remove the stop bolt [c] with a short
screwdriver.
- Move locking bolt [b] upwards and set the desired angle of rotation, you must hear the
locking bolt [b] click into place.
- The stop bolt [c] can be refastened in this position (press the hexagon nut against it from
below).
- Refasten shield [a].
Setting a 360° Angle of Rotation
- Remove shield [a] by loosening the two hexagon socket screws.
- Remove the two limit screws [e] by slightly loosening the cap nut [d].
- Refasten shield [a].
63