Adding Fuel (Wood); Heating With Brown Coal Briquettes - HASE Lisboa Mode D'emploi

11. Adding Fuel (Wood)
More fuel (wood) should be added to the fire during the burning off phase, when the
flames from the previous burning off phase have just gone out.
Adding wood
Procedure
Open the throttle flap entirely,
if your flue pipe has one
Set control elements
Slowly open fire box door to prevent
smoke from entering the surroundings
Close shaking grate
Place two logs each around 0,8 kg lengthways
Add a single layer of combustible
Close door for fire box
Wood should be added when the flames
of the prior fire are about to die
Position of control elements
Set handle of throttle flap along
the length of the pipe.
Set heating-up air slide (I) to second groove
Set secondary air slide (II) to third groove
Push in shaking grate slide
11.1 Heating with brown coal briquettes
Heating with brown coal briquettes
Procedure
Lighting
Light with wood as previously described
Further heating
When the first glow has been reached, place
three briquettes (1,8 kg) at the centre of the
bottom of the fire box above the shaking grate.
Open shaking grate
Open heating-up air valve
Set secondary air flow
Position of the control elements
See instructions for lighting
Pull out shaking grate slide
Set heating-up air slide (I) to third groove
Set secondary air slide (I) to second groove
65