Scope Of Delivery; Warnings; Safety Instructions - Gazzini 10035330 Instructions De Montage Et Mode D'emploi

2 | SCOPE OF DELIVERY

1|
1x bar-end turn signal
1
1x cheese head screw with hole
2
DIN 912 M6 x 45 A2
1x flanged hex nut DIN 6923
3
M6 A2

3 | WARNINGS

To ensure the safety of the vehicle, the turn signal must be
securely fixed in the handlebar – if bar-end turn signals fall off,
they could cause a road accident. Observe the legal instructions
for installing turn signals.

4 | SAFETY INSTRUCTIONS

 The warranty will be rendered null and void in case of any
damage caused by failure to follow these instructions for use.
We assume no liability for consequential loss or damage.
 We assume no liability in case of material damage or
personal injury caused by improper handling or failure to
follow the safety instructions. In such cases, the warranty will
be rendered null and void.
 For reasons of both safety and official approval,
unauthorised modification and/or changes to the product
are not permitted.
 Since this is a universal turn signal and not intended just
for one particular vehicle, it is important to ensure that it is
suitable for your type of bike and can be used correctly
before you use it for the first time. In doing so, always follow
the instructions in your vehicle owner's manual and the
directions of the vehicle manufacturer. This is essential, as
improper use of this product or its unsuitability for a vehicle
14
4|
2| 3| 5| 6|
2x plug
4
1x rubber bushing 20 x D18/d6
5
1x rubber bushing 20 x D14/d6
6
1x rubber bushing 20 x D12/d6
7
1x cap (self-adhesive)
8
7| 8|