General Information - Gazzini 10035330 Instructions De Montage Et Mode D'emploi

POWER LED BAR-END TURN SIGNAL
(Order no. 10035330)
These instructions for installation and use apply exclusively to
the product described. They contain important information on
installation, safety and warranty. You should always follow
these instructions, including if you give the product to someone
else. Keep them in a safe place so that you can refer to them
again later.

1 | GENERAL INFORMATION

Congratulations on the purchase of this gazzini bar-end turn
signal.
This is designed for open-ended tubular handlebars (without
thread inserts) with an outside diameter of 22 mm (metric) and
25.4 mm (imperial). To ensure that you use these components
correctly and safely, please observe the following installation
and safety instructions. This turn signal is not designed for a
specific type of vehicle. The fastening is selected so that it can
be successfully used on a wide range of motorcycle models. The
turn signal has a valid "E" Mark and can therefore be legally
used on the road as a front turn signal without additional TÜV
test centre approval.
13