Scrigno OPEN 2.0 Antamatic Manuel D'utilisation page 58

Open
2.0
17
Fit the cable-motor into the slot of the driven pulley.
Fit the belt in the junction bracket, as shown in the
19
picture.
R1387 DCM2461/SCRIGNO - OPEN2.0 | pagina 58
Pass the motor cable completely through, fitting it
18
into corrugated duct which leads to the junction box.
20
Pass the belt behind the driven pulley.
IMPORTANT!! The junction bracket must be on the
opposite side of the rail, with respect to the cable transit.
EN