Greasing The O-Ring Of The Cassette Vent; Maintenance; Spare Parts; Removing And Replacing The Lid And Seat - Dometic CT 4050 Notice D'utilisation

Maintenance

7.5

Greasing the O-ring of the cassette vent

➤ Take the adapter (fig. m 1, page 12) off the cassette.
➤ Grease only the attached O-ring (fig. m 2, page 12) with silicone grease.
8 Maintenance
This chapter describes maintenance that may be performed by the user. Have all
other maintenance and service work performed by qualified personnel.
8.1

Spare parts

Spare parts can be obtained from the customer service of the respective country.
All the accessories are available from specialist dealers. If you have any questions,
please contact the dealer or your service partner directly.
8.2

Removing and replacing the lid and seat

I
NOTE
The manufacturer accepts no liability for damage resulting from
incorrect or faulty installation.
The required tools are included with the manuals. For the exchange of lid and seat,
use the Dometic Renew Kit for CT3000/CT4000 (ref. no. 9600000458).
➤ Release the toilet seat (fig. n, page 13).
➤ Remove the toilet seat (fig. o, page 13).
➤ Position the new toilet seat and press it down until it latches in place (fig. p,
page 14).
28
CT4000
EN