Cleaning And Maintenance; Greasing The Slider - Dometic CT 4050 Notice D'utilisation

Masquer les pouces Voir aussi pour CT 4050:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 51

Cleaning and maintenance

7
Cleaning and maintenance
!
CAUTION!
Cleaning agents for the toilet may not contain chlorine or alcohol!
A
NOTICE!
To prevent material changes, do not use hard, abrasive or
soda-based cleaning agents (scouring agents).
Do not use polish for cleaning.
I
NOTE
Clean and grease all seals on the toilet and cassette tank regularly.
In case of frequent use, perform these actions monthly or after
3 – 5 drainings of the cassette. Use grease or silicone-based spray.
For regular cleaning of the toilet bowl, use a mild colourless cleaning
agent.
➤ Clean the toilet regularly inside and out with a soft cloth and lukewarm water with
a mild cleaning agent.
➤ Then wash the surfaces with clear water.
The manufacturer recommends:
®
Grease: OKS
1110
Silicone spray: OKS
7.1

Greasing the slider

!
CAUTION!
When the slider is closed during cleaning or greasing, there is a risk of
crushing body parts (fig. b, page 8).
The slide moves smoothly when it is regularly lubricated.
Greasing the slider rods
➤ Spray the rods of the slider with silicone spray (fig. c, page 9).
26
®
1111
CT4000
EN

Publicité

Table des Matières
loading

Table des Matières