Positioning The Toilet Seat; Winter Operation; Shutting Down - Dometic CT 4050 Notice D'utilisation

Masquer les pouces Voir aussi pour CT 4050:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 51
CT4000
A
NOTICE!
Do not clean the inside of the cassette tank with a high-pressure cleaner.
This can damage the float for the level indicator.
➤ Push the cassette tank into the cassette housing (chapter "Pushing the cassette
tank into the cassette housing" on page 22).
6.6

Positioning the toilet seat

The toilet seat can be swivelled continuously (fig. a, page 8).
6.7

Winter operation

A
NOTICE!
Do not use antifreeze. Antifreeze may damage the cassette toilet.
You can also use the cassette toilet in the winter, as long as the toilet and cassette
tank are in a frost-free area.
If this is not the case, empty the freshwater tank, the cassette tank and the water line
of the freshwater supply.
This will prevent damage by frost (chapter "Shutting down" on page 25).
6.8

Shutting down

Drain the freshwater tank and the water supply system completely if you are going to
take the toilet out of service for an extended period of time.
➤ Clean the toilet carefully (chapter "Cleaning and maintenance" on page 26).
➤ Operate the flush button until no more water is in the pipes.
➤ Interrupt the power supply to the toilet.
➤ Then drain the cassette tank and rinse it out carefully. Clean the cassette. To allow
the cassette tank to dry, do not close the drain pipe.
➤ Clean and grease all seals and moving parts of the toilet and the cassette tank
(chapter "Cleaning and maintenance" on page 26) and repeat this operation
before putting the toilet back into service.
EN
Using the toilet
25

Publicité

Table des Matières
loading

Table des Matières