Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Wiring Harness
Terminal Screws
(4x)
M5 Hex Screws
(2x)
20150901 47314-INSTR
V. 4.0 F
page 2 of 5
Oct.2015
Manual Y151 V. 4.0 FR EUR from original TPC 47117-MAN Rev 1214
•
PRE-ASSEMBLE THE PRESS ARM SWITCH (47314) AS
SHOWN IN FIGURE 1.
•
DO NOT TIGHTEN THE HEX NUTS (ITEM 2)
•
REMOVE PRESS ARM SWITCH ASSEMBLY (47071)
For Machines with Serial Number built TO July 2015,
•
through Serial Number: Y1512AE342.
• TURN OFF THE POWER FROM THE MACHINE.
REMOVE THE PLUG FROM THE WALL SOCKET.
•
REMOVE 5 MM HEX SCREWS FROM THE BASE OF THE
SWITCH FRAME USING THE 5 MM HEX KEY WRENCH
•
CAREFULLY REMOVE THE PRESS ARM SWITCH ASSEMBLY
FROM THE MACHINE
•
DISCONNECT THE 4 WIRE SCREW TERMINALS FROM
THE PRESS ARM SWITCH USING A PHILLIPS HEAD
(CROSS HEAD) SCREW DRIVER. DO NOT DISCARD THE
HARDWARE
FIGURE-2. Press Arm Switch Assembly (47071)
56
56
Publicité
Chapitres
Table des Matières
