Stihl RMA 239.1 Notice D'emploi page 33

7 Assembling the Lawn Mower
► Place star grip nuts (9) on bolts (1 and 7) and
screw in.
► Install cable clip (10) on upper handlebar (3)
so the following condition is met:
– Distance (a) is between 25 cm and 27 cm.
► Place cable (5) into cable clip (10).
► Close tab (11) and allow it to engage.
The handlebar must not be dismantled again.
7.2 Folding Up and Folding the
Handlebar
7.2.1 Folding Up the Handlebar
► Switch the lawn mower off and remove the
battery.
► Place the lawn mower on a level surface.
0478-131-9929-A
► Fold up handlebar (1), ensuring that cable (2)
is not trapped.
► Firmly tighten star grip nuts (3).
Handlebar (1) is firmly attached to the lawn
mower.
7.2.2 Folding the Handlebar
The handlebar can be folded for space-saving
transport or storage.
► Switch the lawn mower off and remove the
battery.
► Place the lawn mower on a level surface.
► Hold handlebar (1) and loosen star grip
nuts (2).
► Fold down handlebar (1) forwards.
7.3 Assembling, Attaching and
Detaching the Grass Catcher
Box
7.3.1 Assembling the Grass Catcher Box
► Fit upper part of grass catcher box (1) onto
lower part of grass catcher box (2).
► Press pins (3) through openings (4) from the
inside.
The pins engage audibly.
English
33