Create Wind Stylance Manuel D'instructions page 14

M OU NT IN G TH E LE D PANE L
Connect the single plug of the connecting plate to the LED panel and then attach the LED
panel to the decorative plate using its magnets.
M OU NT I NG TH E D ECO R AT I VE SCRE E N
* Only for the model WITH LIGHT
Once the LED panel is correctly positioned, attach the LED panel decorative screen by
screwing it onto the motor connection panel.
C H ECK TH E I N STALL AT I ON
• Check that the ceiling fan is working properly, checking that no strange movement or mis-
alignment is observed in any part of the fan.
• If any type of humming/vibration can be noticed, you can proceed to adjust the blades with
the anti-sway kit.
• The anti-sway kit features self-adhesive counterweights and "u" shaped clips.
• Turn off the ceiling fan.
• You can put the clip in the center of any blade and check if the vibration decreases.
• Turn on the fan and check. If no change is seen, turn off the fan and add another clip to
another blade or use the adhesive counterweights.
E NGL I SH
14
Plug socket
LED Panel