shark RIDILL-2 Manuel D'utilisation page 31

9. Connect the microphone (red connector), and the keypad as shown in Fig. 37.
11. Make the connections to the
speakers (black 2-branch connector),
and the keyboard as shown in Fig.
39a, then pass the right speaker cable
as shown in Fig. 39b.
10. Make the battery connection (black
3-branch connector), and the keypad
as shown in Fig. 38.
Fig. 38
Fig. 39a
12. Replace the textile foams (cheek
pads and liner) according to the textile
assembly description (page 21-22),
ensuring that all SENA FOR SHARK
system cables are positioned inside
the textile parts, and do not protrude
from the helmet once reassembled.
Fig. 37
Fig. 39b
31
31