2 – Hold the visor in its raised position
in front of the side plates and bring
it to rest against the visor step on
either side.
3 - The visor locks into place by
pressing on either side of the visor
and moving it downwards in a circular
motion.
4 – An audible «click» confirms that
the visor is locked in position.
WARNING! Do not use the helmet
if you are not sure that you
have properly reinstalled the visor.
While riding, the visor could suddenly
and unexpectedly detach from the
helmet, causing you to lose control
of your motorcycle and resulting
in an accident, injury or death. We
recommend contacting your retailer
for assistance and advice.
If you are riding at high speed, do not
2
open the visor. It could come off and
leave your eyes and face unprotected.
Your head could also be pulled back
or to the side, causing you to lose
control of the motorcycle, resulting in
an accident, injury or death.
WARNING! Tinted or coloured
visors must never be used at
night or in poor visibility conditions
as they impair your vision. Never ride
with a fogged up visor.
WARNING! If your visor no lon-
ger provides excellent visibi-
lity after a period of use, it must be
replaced without fail. We recommend
3
that you always ride with optimal visi-
bility.
4
15
15