shark RIDILL-2 Manuel D'utilisation page 17

Table des Matières
REMOVING THE SUN VISOR
Lower the sun visor completely using
the upper control (see p.16).
1 - Gently pull the sun visor downwards
by hand to visually release its central
attachment.
2 - Remove the central fixing pin with
a screwdriver or any other pointed
instrument.
3 - Un-clip the sun visor sideways from
one side and then the other by pulling
it towards you and keeping it straight.
INSTALLING THE SUN VISOR
Perform the removal operations in
reverse order as follows.
Bring the sun visor handling button
into the down position; slide it towards
the front of the helmet (see p.16).
1
4 - Re-clip the sun visor sideways on
one side and then on the other.
2
5 - Using a screwdriver or a pointed
instrument of any kind, press the
central fixing pin from the inside and
then re-clip the sun visor by raising
it slightly.
WARNING! Do not use the
helmet if you are not sure
that you have properly reinstalled
the sun visor. While riding, the sun
visor could suddenly and unexpec-
tedly detach from the helmet, cau-
sing you to lose control of your
3
motorcycle and resulting in an acci-
dent, injury or death. We recom-
mend contacting your retailer for
assistance and advice.
4
5
17
17
Table des Matières
loading

Table des Matières