shark RIDILL-2 Manuel D'utilisation page 12

REMOVING THE VISOR
Your RIDILL 2 is equipped with a
brand-new
system. Press down twice on either
side of the visor at the same time to
easily release the visor.
1 - Open the visor by applying pressure
under the central visor grip.
2 – Raise the visor.
3 – The visor must be opened as far
12
as it will go.
12
quick visor removal
4 – On each of the mechanical side
plates, on either side of the visor,
locate the button marked «R» on the
right side and «L» on the left side.
WARNING!
the visor as soon as you have
pressed the buttons to release it.
1
5 - Press the «L» & «R» buttons simul-
taneously, then use your other fingers
2
on either side to push beneath the
visor to remove it towards the back of
the helmet. Hold on to the visor at the
end of this process.
WARNING! This brand-new quick
visor removal system only works if you
carry out these precise, simultaneous
operations to prevent any risk of the
visor being ripped away while riding.
3
4
Don't forget to hold
5