shark RIDILL-2 Manuel D'utilisation page 30

6. Insert the left and right speakers of
Sena FOR SHARK (Bluetooth or Mesh)
into the ear housings and attach them
by the Velcro present on the back of
the speakers and the Velcro present
on the foam plugs present in the ear
housings. Fig. 34 a/b.
7. Position the microphone and attach
it with the supplied Velcro piece to the
polystyrene on the left cheek as shown
in Fig. 35.
30
30
Fig. 34a
Fig. 34b
8. Affix the main keypad to the defined
location (Fig. 36a), using the double-
sided tape provided on the keypad,
insert the flat cable between the shell
and the polystyrene cheek piece to the
left of the clip lining (red part) as shown
in Fig. 36b.
Fig. 35
Fig. 36a
Fig. 36b