RIDGID HD09180 Mode D'emploi page 12

ASSEMBLY
Inserting the Tug-A-Long
Positive Locking Hose with
Dual-Flex
1. Insert the larger end of the Tug-A-Long
Positive Locking Hose with Dual-Flex into
the Inlet Port. Engage the Hose Latch to
the lip of the Inlet Port. The Latch should
lock in place.
2. To remove the Tug-A-Long Positive
Locking Hose with Dual-Flex from the
Vac, press the Release Lever on the
Hose and pull the Hose out of the Inlet
Port. Hose Release Lever
Tug-A-Long Positive
Locking Hose with
Dual-Flex
Hose Swivel End
12
INSERT
HOSE
Drum
Inlet
Port