De Dietrich TEPPAN YAKI Mode D'emploi Et De Montage page 35

EN
• If several appliances are installed, do not place
hot pots or pans near the slats or above because
they can become damaged.
• ATTENTION DURING INSTALLATION: Before
proceeding with installation inspect the plate for
any visible damage. Never place the damaged
appliance into operation.
• If the surface is cracked, switch off the appliance
and disconnect it from the mains to avoid the
possibility of electric shock.
• Electrical safety is only guaranteed if the
appliance is connected to a compliant protective
conductor. It is very important to make sure that
this condition is verified as it is fundamental to
safety. If in doubt, have the electrical system
checked by a qualified electrician.
• Before connecting the plate to the mains, be
sure to compare the connection data (voltage
and frequency) indicated on the rating plate with
that of the mains supply. The Teppanyaki uses
2500 watts and it is therefore necessary that your
electrical system is able to provide such power
without danger. If the data does not match, the
appliance may be damaged. If in doubt, contact
an electrician.
SAFETY INSTRUCTION
8