Proper Use - Collomix Xo 55 R Duo Manuel D'instructions

Read and observe the opera琀椀ng instruc-
Read and observe the operating instruc-
琀椀ons for the machine before you start it
tions for the machine before you start it
up!
up!
Always wear protec琀椀ve goggles and ear
Always wear protective goggles and ear
protec琀椀on while working.
protection
It is advisable to wear a dust mask whe-
It is advisable
never working with materials which ge-
never working with materials which ge-
nerate large amounts of dust.
nerate large amounts of dust.
Always wear protec琀椀ve gloves while
Always wear
working.
working.
Wear safety shoes with steel caps during
Wear safety shoes with steel caps during
opera琀椀on
operation

Proper use

Proper use
The machine is designed for mixing liquid, granular and
The machine is designed for mixing liquid, granular and
powder-based building products such as paints, mortar,
powder-based building products such as paints, mortar,
concrete, adhesives, plaster, mixes containing silica sand,
concrete, adhesives, plaster, mixes containing silica sand,
thermose琀�ng resin and similar substances. Use the right
thermosetting resin and similar substances. Use the right
mixing tool for the consistency of the material and the
mixing tool for the consistency of the material and the
quan琀椀ty to be mixed.
quantity to be mixed.
Please refer to the informa琀椀on in the technical data
Please refer to the information
when choosing the size of mixing tool (diameter/
when choosing the size of mixing
mixing ac琀椀on). If the wrong mixing ac琀椀on or mixing tool
mixing action). If the wrong mixing action or mixing tool
diameter is selected, this may cause the machine/gear
diameter is selected, this may cause the machine/gear
unit to become overloaded and lead to damage as a
unit to become overloaded and lead to damage as a
result. Please remember that a mixing tool with a mixing
result. Please remember that a mixing tool with a mixing
ac琀椀on from the top down puts a greater strain on the
action from the top down puts a greater strain on the
electrical tool than one with the reverse mixing ac琀椀on.
electrical tool than one with the reverse mixing action.
Given the high torque levels generated by the machine, it
Given the high torque levels generated by the machine, it
must not be used as a power drill.
must not be used as a power drill.
The machine must not be used for the prepara琀椀on of
The machine must not be used for the preparation
foodstu昀昀s.
foodstuffs.
The machine is not suitable for mixing materials
The machine is not
containing graphite dust, brine or slurry. Mixing of
containing graphite dust, brine or slurry.
these materials or substances may damage the machine
these materials or substances may damage the machine
beyond repair.
beyond repair.
Assembly
Assembly
► Always pull the power plug out of the socket outlet
Always pull the power
before carrying out any work on the machine.
before carrying out any work on the machine.
Fi琀�ng the s琀椀rrer / tool change-over (Fig. A):
Fitting the stirrer / tool change-over (Fig. A):
Insert the mixing tool with the HEXAFIX mount in the
Insert the mixing tool with the HEXAFIX mount in the
coupling un琀椀l it locks. Make sure that the markings on
coupling until it locks. Make sure that the markings on
the mixing a琀琀achments match those of the respec琀椀ve
the mixing attachments match those of the respective
mixing sha昀琀 when you 昀椀t them (I + II). For trouble-free
mixing shaft when you fit them (l + II). For trouble-free
opera琀椀on the markings must match up. In addi琀椀on, the
operation the markings must match up. In addition, the
s琀椀rrers can only be 昀椀琀琀ed in certain posi琀椀ons. This is to
stirrers can only be fitted in certain positions. This is to
ensure that they do not come into contact with each
ensure that they do not come into contact with each
other.
other.
while working.
to wear a dust mask
protective gloves while
in the technical
tool (diameter/
suitable for mixing
Mixing of
plug out of the socket outlet
To release or change the mixing tools, simply pull back
To release or change the mixing
the handle-collar on the coupling and this releases the
the handle-collar
mixing tool.
mixing tool.
Switching the mixing tools over allows the mixing ac琀椀on
Switching the mixing tools over allows the mixing action
to be reversed. This can be an advantage for liquid
to be reversed. This can be an advantage for liquid
materials. Please note, however: This places greater
materials.
strain on the drive unit. The supplied protec琀椀ve caps are
strain on the drive unit. The supplied protective caps are
designed to prevent the HEXAFIX coupling ge琀�ng dirty
designed to prevent the HEXAFIX coupling getting dirty
and help contribute to trouble-free opera琀椀on.
and help contribute to trouble-free operation.
whe-
Opera琀椀on
Operation
► Check that the power supply shown on the rating
Check that the power supply shown on the rating
plate is the same as the mains power supply.
plate is the same as the mains power supply.
Always hold the machine with both hands.
Always hold the machine
data
2.
Tips for safe working:
Tips for safe working:
Always reduce the speed when submerging the mixing
Always reduce the speed when submerging the mixing
tool in the mixing material or li昀琀ing it out. Once the
tool in the mixing material or lifting it out. Once the
mixing tool is fully submerged, increase the speed again
mixing tool is fully submerged, increase the speed again
to ensure that the motor is adequately cooled.
to ensure that the motor is adequately cooled.
During mixing you should guide the machine around
During mixing
of
the mixing container. Con琀椀nue mixing un琀椀l all of the
the mixing
mixing material is completely mixed. Please follow the
mixing material
processing instruc琀椀ons of the manufacturer of the
materials
processing
material. material.
You work be琀琀er and safer when the mixing tool used is
You work better and safer when the mixing tool used is
clean, free of material residues and in perfect condi琀椀on.
clean, free of material residues and in perfect condition.
The greater the viscosity of the material, the greater
The greater the viscosity of the material, the greater
the impact of the torque forces on the machine, so you
the impact of the torque forces on the machine, so you
should be prepared for this when you carry out your
should be prepared for this when you carry out your
work.
work.
If the mixing tool comes into contact with a surface (e.g.
If the mixing tool comes into contact with a surface (e.g.
the bo琀琀om of the tub) while running, it may kick back.
the bottom of the tub) while running, it may kick back.
Set the machine down res琀椀ng on the guard handle a昀琀er
Set the machine down resting on the guard handle after
you have 昀椀nished your mixing work.
you have finished your mixing work.
tools,
on the coupling
Please note, however:
with both hands.
Press the star琀椀ng lockout
Press the
bu琀琀on (1).
button (1).
Press the ON/OFF switch (2).
Press the ON/OFF switch (2).
The more pressure you apply to
The more pressure you apply to
the ON/OFF switch, the faster
the ON/OFF switch, the faster
the machine will run. The ON/
the machine will run. The ON/
OFF switch cannot be locked!
OFF switch
Always work with the ON/OFF
Always work with the ON/OFF
switch fully pressed.
switch fully pressed.
To stop working, release the
To stop working,
ON/OFF switch.
ON/OFF switch.
you should guide
container. Continue mixing
is completely mixed. Please follow
instructions of the
simply pull back
and this releases the
This places greater
starting lockout
cannot be locked!
release the
the machine around
until all of the
the
manufacturer of the