Technical Data; Machine Components; Ce Declaration Of Conformity - Collomix Xo 55 R Duo Manuel D'instructions

Technical data

Technical data
Rated power/Current consump琀椀 on:
Rated power/Current
Power supply:
Power supply:
Frequency:
Frequency:
No-load speed, 昀椀 rst gear
No-load speed, first gear
Rpm under load, 昀椀 rst gear
Rpm under load, first gear
Mixing tool:
Mixing tool:
Weight w/o mixing tool:
Weight w/o mixing tool:
Protec琀椀 on class:
Protection class:

Machine components

Machine components
1 Release bu琀琀 on for ON/OFF switch
Release button for ON/OFF switch
1
2 ON/OFF switch
ON/OFF switch
2
3 Handle frame with rubber buff er
3 Handle frame with
4 Handle
4 Handle
5 Holes for machine moun琀椀 ng
Holes for machine mounting
5
6 Ven琀椀 la琀椀 on slits
6 Ventilation slits
7 Mixing sha昀琀
7 Mixing shaft
8 Mixing sha昀琀 marking
Mixing shaft marking
8
9 9 HEXAFIX coupling HEXAFIX coupling
10 Mixing tool
10 Mixing tool
11 Protec琀椀 ve caps
Protective caps
11
Noise/vibra琀椀 on levels
Noise/vibration levels
Measured values determined in accordance with EN
Measured values determined
60745. The A-weighted noise level of the machine is
60745. The A-weighted noise level of the machine is
typically:
typically:
Sound pressure level Sound pressure level
[dB(A)]
LPA [dB(A)]
L
pA
88 dB(a)
88 dB(a)
Xo 55 R duo xo 55 R duo
Uncertainty K = 3 dB Uncertainty
Overall vibra琀椀 on level (for mixing of mineral
Overall vibration level (for mixing of mineral
materials)
materials)
Emission level a
Emissionlevel an [m/s2]
Xo 55 R duo xo 55 R duo
Uncertainty K = 1,5 m/s2
Uncertainty K = 1,5 m/s
consumption:
rubber buffer
in accordance with
Sound power level Sound power level
[dB(A)]
LWA [dB(A)]
L
WA
99 dB(A)
99 dB(A)
K = 3 dB
]
[m/s 2
n
1,3 m/s2
2
1,3 m/s
2
xo 55 R duo
Xo 55 R duo
1450 W / 13.4 amps 1450 W / 13.4 amps
120 V
120 v
60 Hz
60 Hz
- 640 min -1/
- 640 min-
-1
- 430 min
- 430 min-
MKD 140 HF
MKD 140 HF
6,9 kg / 15.2 lbs
kg/ 15.2 lbs
Ü/II
/ II
WARNING:
WARNING:
The measured values which are provided apply to new
The measured values which are provided apply to new
machines. Noise and vibra琀椀 on levels change with day-to-
machines. Noise and vibration levels change with day-to-
day use.
day use.

NOTE
NOTE
The vibra琀椀 on level given in these instruc琀椀 ons was
The vibration
measured in accordance with a standardized method of
measured in accordance
measurement as de昀椀 ned in EN 60745 and can be used
measurement
for the purposes of comparing electrical tools with each
for the purposes of comparing electrical tools with each
other. It is also suitable for a preliminary es琀椀 ma琀椀 on
other. It is also suitable for a preliminary
of vibra琀椀 on strain. The vibra琀椀 on level which is given
of vibration
represents vibra琀椀 on level for the primary use of the
represents vibration
electrical tool. If, however, the electrical tool is used for
electrical tool.
any other purposes, with di昀昀 erent plug-in tools or with
any other purposes, with different
insu昀케 cient maintenance, the vibra琀椀 on level may vary.
insufficient
This can result in a signi昀椀 cantly higher level of vibra琀椀 on
This can result in a significantly higher level of vibration
strain over the work period as a whole.
strain over the work period as a whole.
For a precise es琀椀 ma琀椀 on of the vibra琀椀 on strain the 琀椀 mes
For a precise estimation of the vibration strain the times
when the machine is switched o昀昀 have to be taken into
when the machine
account as well, as do the 琀椀 mes when it is running but is
account as well, as do the times when it is running but is
EN
not actually being used. This can result in a signi昀椀 cantly
not actually being used. This can result in a significantly
reduced level of vibra琀椀 on strain over the work period as
reduced level of vibration strain over the work period as
a whole.
a whole.
CE Declara琀椀 on of Conformity
CEDeclaration of Conformity
We declare, with sole responsibility, that this product
We declare, with sole responsibility,
complies with the following standards or norma琀椀 ve
complies with the following
products: EN 55014, EN 61000, EN 60745-1:2009 +
products: EN 55014, EN 61000, EN 60745-1:2009
EN60745-2-1:2010 in accordance with the provisions of
EN60745-2-I:2010
direc琀椀 ves 2004/108/EC, 2006/42 EC, 2011/65/EU
directives 2004/108/EC, 2006/42 EC, 2011/65/EU
Technical documenta琀椀 on can be requested from:
Technical documentation
Collomix GmbH
Collomix GmbH
Abt. Technische Entwicklung
Abt. Technische
Daimlerstr. 9, 85080 Gaimersheim, Germany
Daimlerstr. 9, 85080 Gaimersheim,
level given in these instructions
with a standardized
as defined in EN 60745
strain. The vibration
level for the primary use of the
If, however, the electrical
maintenance, the vibration
is switched off
standards or normative
in accordance with the provisions of
Gaimersheim, 2018-12-04
Gaimersheim,
Alexander Essing
Alexander Essing
Managing Director
Managing Director
can be requested
Entwicklung
was
method of
and can be used
estimation
level which is given
tool is used for
plug-in tools or with
level may vary.
have to be taken into
that this product
+
from:
Germany