Ryobi RC43P Mode D'emploi page 7

with plastic parts. These products contain chemicals that
can damage, weaken, or destroy plastic.
■
Hazardous voltages are present within the product; do
not disassemble.
■
The supply cord cannot be replaced. If the cord is
damaged, the product should be scrapped.
CLEANING THE CHARGER
■
Unplug the charger power cord from the power supply
before cleaning to prevent serious personal injury.
■
Clean the charger surface (except labels) using a damp
cloth with a mild detergent.
■
Do not use any strong detergents on the plastic housing.
They can be damaged by certain aromatic oils, such as
pine and lemon, and by solvents such as kerosene.
■
Moisture can cause a shock hazard. Wipe off any
moisture with a soft dry cloth.
STORAGE
■
Store the product in a cool dry place between 10°C and
38°C.
KNOW YOUR PRODUCT
See page 66.
1. Battery port
2. LED indicators
3. Wall mounting holes
4. Operator's manual
5. Battery pack
SYMBOLS
Direct current
CHARGER LED FUNCTIONS
LED indicator
Standby
Evaluate Hot battery pack
Evaluate Cold battery pack
Defective
• If defective, try to repeat the conditions a second time by removing and reinstalling the battery pack. If the
LED status repeats a second time, try charging a diff erent battery.
• If a diff erent battery charges normally, dispose of the defective pack (see Maintenance section).
• If a diff erent battery also indicates "Defective," the charger may be defective.
Charging
Charging
Battery pack
Red LED
status
Multiple battery
ON
packs installed
Flashing
Flashing
Defective Flashing
Fast charging OFF
Taper charging OFF
Alternating current
Class II equipment
Please read the instructions carefully before
starting the product.
For indoor use only.
Time-lag fuse 3.15A
Do not dispose of waste electrical
and electronic equipment as unsorted
municipal waste. Waste electrical and
electronic equipment must be collected
separately. Waste light sources have to be
removed from the equipment. Check with
your local authority or retailer for recycling
advice and collection point. According to
local regulations, retailers may have an
obligation to take back waste electrical
and electronic equipment free of charge.
Your contribution to the reuse and
recycling of waste electrical and electronic
equipment helps to reduce the demand
of raw materials. Waste electrical and
electronic equipment contain valuable
and recyclable materials, which can
adversely impact the environment and
the human health if not disposed of in
an environmentally compatible manner.
Delete personal data from waste
equipment, if any.
Green LED
Battery pack is waiting to be charged. The
OFF product will attempt to charge battery packs in
the order that they are installed.
When battery pack reaches cooled temperature,
OFF
charger begins fast charge mode.
When battery pack reaches warmed
OFF
temperature, charger begins fast charge mode.
Flashing Battery pack or charger is defective.
Flashing Battery pack is being charged.
Fading Battery pack is being charged at lower rate.
Action
7
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL