Parkside PLEM 20 B6 Instructions D'utilisation page 33

Note: If laser beam is
already activated, the
above mentioned step
can be skipped.
Now aim the laser at
the target point. Briefly
press the MEAS button
again. If the meas-
4
urement is successful
the measured value will
be shown on the bot-
tom line of the display
and the laser beam
3
will be turned off.
If needed to measure
another distance, re-
peat above steps.
Newly measured value
will be shown on the
bottom line of the dis-
play
3
and the previous
GB/IE/NI
33