RIB NORMAL 3P Mode D'emploi page 50

G
ACCESSORIES
B
For the connections and the technical data of the optional equipments follow the relevant handbooks.
TELESCOPIC OCTAGONAL BOOM ARM, 6 m
Telescopic octagonal boom arm and fixing hub L = 3 + 3 m.
HANGING RACK
L = 2 m
L = 3 m
WARNING: Not to use in windy areas.
N.B. It is obligatory to install an Hanging support ACG8285 or one Fork type support
column ACG9130G.
Maximum 200 daily cycles - Not for 7 - 8 m boom arms
Ø 100 mm BOOM ARM
L=6 m Ø 100 mm boom arm need fixing hub
L=8 m Ø 100 mm boom arm need fixing hub
NOTE: when ordering, the special balance springs should be required (CME8100 for balance
spring Ø 5,5 and CME8068 for balance spring Ø 6).
Springs tensioning
L = 6 m cod. ACG8497
L = 8 m cod. ACG8521
STICKERS FOR OCTAGONAL BOOM ARMS
12 pieces.
code ACG8513
code ACG8290
code ACG8291
code ACG8497
code ACG8521
*
0 cm
6 cm
code ACG8527
TELESCOPIC OCTAGONAL BOOM ARM, 7 m
Telescopic octagonal boom arm and fixing hub L = 4 + 3 m.
FIXING HUB
Fixing hub for telescopic octagonal boom arm
FIXING HUB
Fixing hub for L=6m Ø100 mm boom arm
Fixing hub for L=8m Ø100 mm boom arm
BASE PLATE
Base plate.
STICKERS FOR Ø 100 BOOM ARM
12 pieces.
code ACG8514
code ACG8564G
code ACG8539G
code ACG8565
code ACG8110
code ACG8526