RIB NORMAL 3P Mode D'emploi page 37

SYSTEM LAY-OUT
NORMAL barrier
- Photoelectric cells
- Galvanized column for P.E. cells
- Fotocosta
- Magnetic loop
- Key selector
- Tuned aerial
- Emergency button
TECHNICAL CHARACTERISTICS
Lh./rh.irreversible gearmotor used for raising and lowering barrier poles up to 6-7-8 m long.
The upright can be supplied in a painted galvanized version.
The barrier boom can be supplied as one unjointed length or, where headroom is restricted, it can
be requested in an articulated version if you specify the height of the obstruction above road level.
Besides it can be supplied in one piece with hanging rack.
The barrier boom is designed to be fitted with a pneumatic or photocell safety strip.
ATTENTION: It is compulsory to conform the barrier characteristics to the current regulations and
laws.
THIS OPERATOR IS DESIGNED FOR THE VEHICLES ACCESS CONTROL AND NOT FOR
PEDESTRIANS.
Therefore, we higly recommend the use of safety devices and that of one or
more warning plates, art. ACG9642 to prevent the pedestrians interfering with
the operator.
TECHNICAL DATA
Max. boom lenght
Opening time
Max. torque
EEC Power supply
Motor capacity
Power absorbed
Normative cycles 230V
Daily operations suggested
Service
Guaranteed consecutive cycles
Lubrification
Weight of electroreducer
Noise
Working Temperature
Protection grade
37
Measurements in mm
NORMAL 3P
m
s
Nm 540
230V~ 50Hz
W 608
A 1,6
1000 - 11s/2s
n°
n° 1000
% 100
n° 1000
SHELL OMALA S2 G100
145
kg
db <70
°C -10 ÷ +55
IP 55
G
B
8
9