Samson 251GR Notice De Montage Et De Mise En Service page 70

Module H / N° CE-0062-PED-H-SAM 001-22-DEU-rev-B
For the following products, SAMSON hereby declares under its sole responsibility:
Devices
Globe valve
Three-way valve
Cryogenic valve
Globe valve
Globe valve
Three-way valve
Globe valve
Angle valve
Split-body valve
Angle valve (IG standards)
Globe valve
Three-way valve
Angle seat valve
Silencer
Globe valve
Cryogenic valve
Three-way valve
Globe valve
Angle valve
Cryogenic valve
Globe valve
Angle valve
Cryogenic valve
Control valve
Globe valve
Globe valve
Globe valve
1)
Gases according to Article 4(1)(c.i), second indent
Liquids according to Article 4(1)(c.ii)
that the products mentioned above comply with the requirements of the following standards:
Directive of the European Parliament and of the Council on the harmonization of
the laws of the Member States relating to the making available on the market of
pressure equipment
Applied conformity assessment procedure for fluids according to Article 4(1)
The manufacturer's quality management system is monitored by the following notified body:
Bureau Veritas Services SAS, 4 place des Saisons, 92400 Courbevoie, France
Applied harmonised standards and technical specifications:
EN 16668 (incl. EN 12516-2, EN 12516-3, EN 12266-1), ASME B16.34
Manufacturer: SAMSON AKTIENGESELLSCHAFT, Weismüllerstrasse 3, 60314 Frankfurt am Main, Germany
Frankfurt am Main, February 17, 2025
Dr. Andreas Widl
Chief Executive Officer (CEO)
Classification: Public · SAMSON AKTIENGESELLSCHAFT · Weismüllerstrasse 3 · 60314 Frankfurt am Main, Germany
Series Type Version
EN, body of gray cast iron from DN 150, body of spheroidal-graphite iron, from DN 100,
fluids G2, L1, L2
240 3241
EN/ANSI, body of steel, etc., all fluids
EN, body of gray cast iron from DN 150, body of spheroidal-graphite iron, from DN 100,
fluids G2, L1, L2
240 3244
EN/ANSI, body of steel, etc., all fluids
240 3248 EN/ANSI, all fluids
250 3251 EN/ANSI, all fluids
250 3251-E EN/ANSI, all fluids
250 3253 EN/ANSI, body of steel, etc., all fluids
250 3254 EN/ANSI, all fluids
250 3256 EN/ANSI, all fluids
250 3258 EN, all fluids
250 3259 EN, all fluids
EN, body of steel, etc., all fluids
V2001 3321
ANSI, all fluids
EN, body of steel, etc., all fluids
V2001 3323
ANSI, all fluids
--- 3353 EN, body of steel, etc., all fluids
3381-1 EN/ANSI, single attenuation plate with welding ends, all fluids
3381 3381-3 EN/ANSI, all fluids
3381-4 EN/ANSI, single attenuation plate multi-stage with welding ends, all fluids
240 3241 ANSI, body of gray cast iron, Class 125, from NPS 5, fluids G2, L1, L2
240 3246 EN/ANSI, all fluids
250 3253 EN, body of gray cast iron from DN200 PN16, fluids G2, L1, L2
290 3291 ANSI, all fluids
290 3296 ANSI, all fluids
--- 3588 ANSI, up to NPS 6, Class 600, all fluids
590 3591 ANSI, all fluids
590 3596 ANSI, all fluids
590 3598 ANSI, NPS 3 to NPS 8, Class 900, all fluids
590 3595 ANSI, all fluids
SMS 241GR EN/ANSI, all fluids
SMS 251GR EN/ANSI, all fluids
SMS 261GR EN/ANSI, all fluids
1)
1)
2014/68/EU
Module H
Sebastian Krause
Vice President Product Development
1)
1)
of 15 May 2014
Certificate-No.:
N°CE-0062-PED-H-SAM 001-22-DEU-rev-B
by Bureau Veritas 0062
Revision 13
Page 1 of 1