Caberg JUST SPEAK Sécurité Et Instructions D'utilisation page 31

Masquer les pouces Voir aussi pour JUST SPEAK:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

helm_mod_D1359bluetoothOK
12-02-2007
12:07
Pagina 31
ENG
To answer the call, simply press the multifunction button (short press) on the Master helmet.
(Note: rarely in some phones you have to use a medium press)
When the Master helmet answers a call, all communication with the Slave helmet is temporarily interrup-
ted. This is indicated in the Slave helmet by an interruption tone.
At the end of the call, the Master helmet automatically re-establishes communication with the Slave hel-
met (if communicating with this before answering the call).
A call can be ended by pressing the button on the Master helmet for 2 seconds.
Making a call.
If the helmet is on and not connected to another helmet, you can make a call as normal with the phone.
Dial the number, send the call from the phone and then press the button on the helmet (short press). The
communication is then passed to the helmet.
Most Sony Ericsson phones, once the call has been sent by the phone, pass the call directly to the hel-
ment without your having to press the button on the helmet (this is true even when the Master helmet is
communicating with the Slave helmet). Phones paired to the helmet in Head-set mode: you hear a dou-
ble tone when the call is passed to the helmet.
Most other phones: if the Master and Slave are communicating, you need to disconnect the helmets befo-
re making a call.
CAUTION: Respect the Highway Code. Never use your phone when driving.
Never answer a call when driving. To make a call, stop your vehicle in a safe place, make your call
and start driving only after ending the call.
To disconnect two connected helmets:
Press the multifunction button (medium press) on either helmet until you hear the tone: the helmets stop
communicating.
Make your call, as described above.
After ending your call, press the button on the Master helmet to reconnect the two helmets: the helmets
reconnect.
To disconnect a helmet from the phone (Hands-Free protocol only)
Press the button (medium press) until you hear a tone in the earpiece.
29

Publicité

Table des Matières
loading

Table des Matières