Charging The Battery - Caberg JUST SPEAK Sécurité Et Instructions D'utilisation

helm_mod_D1359bluetoothOK 12-02-2007 12:07 Pagina 24
ENG
CONTENTS

Charging the battery.

Pairing.
Switching on/off.
Adjusting the volume.
Using the phone.
CHARGING THE BATTERY
Before using the CABERG JUST SPEAK system, you need to charge the battery inside the helmet.
The system has about 12 hours standby with another helmet and about 18 hours standby in phone mode
when the battery is fully charged. In phone mode standby diminishes in proportion to talk-time (min 12
hours constant communication).
When the battery runs low, during use, the system switches off: charge the battery.
If not used for long periods, the battery needs to be charged occasionally.
Switch the helmet off when charging the battery.
WARNING :Do not wear your helmet when charging the battery!
How to charge the battery:
Connect the battery charger to the mains (220V). The green led comes on. The battery charger works
with voltage of min. 100 V and max. 240 V
Place the battery charger jack in the charging port inside the helmet . The red led comes on, meaning
that the battery is being charged. When fully charged the led turns green.
Fully charge the battery before using the CABERG JUST SPEAK system for the first time.
You can then charge the battery briefly, though it's best to fully charge it each time, if possible: partial
charging will not guarantee full standby.
CAUTION: Use only the battery charger provided. Never use other devices to charge the battery. Never
wear your helmet when charging the battery.
CAUTION: Never do the pairing procedure when driving
PAIRING: the basics
22