Switching On/Off - Caberg JUST SPEAK Sécurité Et Instructions D'utilisation

Masquer les pouces Voir aussi pour JUST SPEAK:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

helm_mod_D1359bluetoothOK
12-02-2007
12:07
Pagina 28
ENG
Phones using Hand-free protocol
Enter the helmet pairing mode as explained above (Head-set protocol). This time, when the led starts fla-
shing rapidly, hold the button down for a further 4 seconds until the helmet emits a double tone: release
the button and pair as explained for Head-set protocol.
N.B.: some phones (see www.stilo.it) must be connected to the helmet after being paired by pressing the
button and then releasing this immediately. This brief connection procedure needs to be repeated each
time you switch the helmet on (switch the helmet on and then briefly press the button and release).

SWITCHING ON/OFF

After pairing (see above), all you need to do to use the helmets is follow the switching on/off procedures
described below.
N.B. Read the "Intercom mode" and "Handset mode" paragraphs below before switching the helmets on.
How to switch the helmet on.
Press the multifunction button (long press) for 4 seconds until the led is steady, confirmed by a high-pit-
ched tone in the earpiece. Release the button. The led starts flashing slowly: the helmet is now on.
Intercom mode.
First switch the Slave helmet on and then the Master helmet.
As soon as it's been switched on, the Master searches for the Slave and connects to this automatically:
the helmets are now ready to communicate. The Master helmet is also ready to accept in-coming calls if
this is possible (see www.stilo.it).
If the two helmets fail to connect (low-pitched tone), switch them off and start again.
Two paired helmets that have been switch on can be connected at any time by pressing the button on
the Master helmet (medium press).
N.B.: If a helmet is paired and connected to a phone that doesn't allow for Intercom mode (see
www.stilo.it), you need to disconnect the phone (medium press) before using the helmet Intercom mode.
Handset mode.
N.B.: The functions described below vary depending on your phone or software upgrades. See
www.stilo.it for a list of the phones that have been tested and a full description of the operating mode for
each function.
26

Publicité

Table des Matières
loading

Table des Matières