Caberg JUST SPEAK Sécurité Et Instructions D'utilisation page 21

helm_mod_D1359bluetoothOK
The Caberg Just Speak system is adapted to suit the Caberg Justissimo GT helmet.
12-02-2007 12:07
6) Place the Caberg just Speak unit in the space provided in the
polystyrene foam, as shown in photo 6.
7) Connect the wires for the button (1) and the microphone (2)
to the electronic board.
8) Secure the Caberg just Speak system; fit the wires in the
slot provided and secure the button.e.
9) Return the washable lining and the cheek-pads; place the
earpieces in the space provided in the cheek-pads.
Make sure you do not "pinch" the wires when doing this.
10) Fit the earpiece covers.
Note: Once the Caberg Just Speak system has been fitted, the neck strap must
pass below the cheek-pads and not be inserted in the slot provided in these.
Always check that the neck strap is adjusted to the right length; re-adjust as neces-
sary (see helmet instructions).
Pagina 21
ENG
19