General Power Tool Safety Warnings; Federal Communications Commission; Functional Description - Milwaukee M12 Manuel De L'utilisateur

GENERAL POWER TOOL
SAFETY WARNINGS
Read all safety warnings and in-
WARNING
structions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury. Save these in-
structions - This OPERATOR'S MANUAL contains
important safety and operating instructions for
this Infrared Camera. Before using the Infrared
Camera, read this OPERATOR'S MANUAL, the
M12 Battery Charger and Battery OPERATOR'S
TM
MANUAL, and all labels on the battery pack,
charger and Infrared Camera.
• Avoid dangerous environments. Do not use in
rain, snow, damp or wet locations. Do not use in
the presence of explosive atmospheres (gaseous
fumes, dust or flammable materials) because sparks
may be generated when inserting or removing bat-
tery pack, possibly causing fire or explosion.
BATTERY USE AND CARE
•Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
•Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
•When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
SERVICE
•Have your Infrared Camera serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the tool is
maintained.
•Do not disassemble. Incorrect reassembly may
result in the risk of electric shock or fire. If it is dam-
aged, take it to a MILWAUKEE service facility.
•Store in a cool, dry place. Do not store where
temperatures may exceed 120 °F (50 °C) such as
in direct sunlight, a vehicle or metal building during
the summer.
•Do not remove or deface labels. Maintain labels
and nameplates. These carry important information.
If unreadable or missing, contact a MILWAUKEE
service facility for a free replacement.

Federal Communications Commission

Changes or modifications to this unit
WARNING
not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment. This equipment
has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment
and receiver.
•Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV
technician for help.

FUNCTIONAL DESCRIPTION

3
1
2
1. SDHC card slot
2. Micro USB port
3. Media door
4. LED worklight
5. Laser indicators
6. Infrared camera lens
7. Trigger
8. Handle
9. Settings button
10. Image review
button
11. Arrow buttons
12. OK button
13. Power button
14. LED worklight
button
15. LED worklight ON
16. Target temperature
17. Temperature
crosshair
18. Battery charge
indicator
19. COLD indicator
(blue)
20. Palette bar
21. HOT indicator (red)
22. HOT/COLD indicators ON/OFF
23. Protective cover (not shown)
2
7
8
11
12
13
14
OK
17
15 16
22 21 20
4
5
6
5
9
10
18
19