GE Xcellerex XDUO Quad Single-Use Mode D'emploi page 387

Probe selector
The probe selector dialog box is accessed by selecting either probe "A" or "B" in the probe
selector displays for conductivity, pH or mixer temperature in the Mixer0X window. It
allows the user to select the alternative probe. This is an optional component and is
present only if duplicate probes of the same type are present on a system.
Remarque :
Calibration offset
The calibration offset dialog box is accessed by clicking a process variable object in the
Mixer0X window. This dialog box allows the user to enter a positive or negative offset
value during calibration, leading to more accurate display of the true value of the process.
The parameters that are able to accept calibration offsets are as follows:
•
•
•
•
The following illustration shows an example of calibration offset dialog box.
Xcellerex XDUO Quad Single-Use Mixeur Mode d'emploi 29-0885-07 AA
Password confirmation is needed to access this function.
Conductivity
pH
Vessel temperature
Vessel weight
B User interface description
B.2 User interface: dialog boxes
B.2.4 Vessel content control dialog boxes
387