Inspection And Maintenance - Invacare Matrx Pb Back Manuel D'utilisation

3.0 M
ATRX
3.1 MATRX PB BACK OVERVIEW & INSTALLATION
®
The Matrx PB back is constructed using molded polyurethane foam that wraps around
the ABS shell for maximum comfort. The back shell is contoured to provide exceptional
support and positioning. The Matrx
that can be installed/inserted behind the molded foam cushion to provide additional
positioning capability.
breathable polyester mesh (Meshtex™) fabric. Regular cleaning and inspection of the
outer cover is recommended. Refer to 4.0 - Care and Maintenance
M :
ODELS
MPB = P B
OSTURE
HDB = H D
EAVY UTY
IMPORTANT! The installation and set-up of the Matrx
performed by a Qualified Technician and/or Healthcare Provider.
M H
OUNTING ARDWARE
The Matrx PB Back comes standard with our removable EasySet Mounting Hardware
(PBMH). Additional hardware options (Fixed Hardware (FSSH), Extended Range Hardware
(ERMH) and Split Mounting Hardware (SMH)) are available at the time of order.
The Matrx PB Back has been designed to install onto wheelchair back canes that are up
to 1" (25mm) wider or 1" (25mm) narrower than the nominal back width.
C D
ONTOUR EPTH
• MPB, HDB = 5" (13 cm)
• PBD, DHD = 7" (18 cm)
W C
EIGHT APACITY
• MPB, PBD
• HDB, DHD = 500 lb (227 kg)
4.0 C
ARE AND
Frequent visual inspection should be performed on all components, including upholstery,
foam, hardware/fasteners and any plastic components.

4.1 INSPECTION AND MAINTENANCE

WARNING! Risk of injury or damage W
• Do not continue to use this product if problems or damage are discovered;
• Corrective maintenance can be performed at or arranged through your service provider
Weekly: Inspect ALL fasteners weekly to ensure that mechanical connections and
attaching hardware are tightened securely.
Monthly: Perform a visual inspection of parts including hardware, brackets, upholstery
materials, foam, and plastics for deformation, corrosion, breakage, wear or compression.
Replace damaged/worn components if necessary.
PB B
ACK
The Matrx
( );
ACK STANDARD
P B ;
OSTURE ACK
:
:
:
= 300 lb (136 kg)
M
AINTENANCE
®
PB back includes an optional lumbar support pad
®
PB outer cover is made of a moisture resistant/
PBD = P
OSTURE
DHD = D
EEP
- 6 -
B D
ACK EEP
H D P
EAVY UTY OSTURE
®
PB Back MUST be
B
ACK