Publicité
Les langues disponibles
Les langues disponibles
4.0 C
ARE AND
4.1 INSPECTION
Frequent visual inspection should be performed on all components, including uphol-
stery, foam, hardware/fasteners and any plastic components.
WARNING! Risk of injury or damage
W
• Do not continue to use this product if problems or damage are discovered;
• Corrective maintenance can be performed by or arranged thru your local
service provider
Weekly: Inspect ALL fasteners weekly to ensure that mechanical connections
and attaching hardware are tightened securely.
Monthly: Perform a visual inspection of parts including hardware, brackets, upholstery
materials, foam, and plastics for deformation, corrosion, breakage, wear or
compression. Replace damaged/worn components if necessary.
4.2 CLEANING/LAUNDERING:
The outer cover on the MX2 Back is made of a breathable spacer mesh, combined
with a leatherette material for added durability. Regular cleaning and inspection of
the outer cover is recommended.
W
WARNING! Risk of damage
To avoid infectious exposure, inspect cushion thoroughly and properly clean
and disinfect any materials soiled with blood or other bodily fluids.
CAUTION! Risk of damage
• DO NOT use cleaning and disinfecting agents with abrasive, staining, or polymer-
damaging properties such as phenols, alcohols, or bleaches. Chlorine solutions used
even in low concentrations on a regular basis can diminish the life of the cover.
• Chosen cleaning agents and disinfectants must be compatible with one another
in order to effectively protect the materials on which they are applied.
• Keep clear of open heat sources during cleaning.
4.2.1 G
ENERAL
O
C
: The MX2 cover can be wiped with a damp absorbent towel, cloth, or
UTER
OVER
paper towel. Remove all gross contamination from surface (i.e. food particles, urine,
feces, blood). Spot-clean with mild soap and water.
B
S
/H
ACK
HELL
ARDWARE
clean with soap and water as necessary.
4.2.2 L
AUNDERING
IMPORTANT!
from the inner foam cushion. (Note: Do Not Dry Clean, Do Not Bleach).
IMPORTANT! Adequate drying is a crucial factor in the care and maintenance
of all covers. The covers should be dried completely prior to use on the cushion.
Air drying of covers is recommended.
M
AINTENANCE
MAINTENANCE
AND
C
:
LEANING
: The back shell and hardware/components can be wiped
I
NSTRUCTIONS
PRIOR to Laundering: The MX2 Back cover MUST be removed
- 8 -
Publicité
